Dernière version du 3 mai 2017 à 09:52

Step by Step

Open your SVG file with AI or Inkscape and check the cut configuration
1. No infill
2. Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in
Print (Ctrl+P), choose Trotec printer, your work will appear in the joblist in JobControl (JC)
Put material in the machine

4 Laser Focus Calibration
Check focus calibration

5 Laser Set Origin
Set origin
In JobControl drag and drop your model from the Jobs list to the plate area.
Check material configuration (with correct thickness)
Check cutting time
Start cutting
Go outside the box until the end of the cutting.

@@ Ligne 1 : / Ligne 1 : @@
 = Step by Step =
+# Open your SVG file with AI or Inkscape  and check the cut configuration
-# Check cut configuration
 ## No infill
 ## Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in
+# Print (Ctrl+P), choose Trotec printer, your work will appear in the joblist in JobControl (JC)
-# Print (Ctrl+P)
-# Put material in the machine [[File:Laserfocuscal.jpg|thumb|Laser Focus Calibration]]
+# Put material in the machine [[File:Laserfocuscal.jpg|thumb| 4 Laser Focus Calibration]]
-# Check focus calibration [[File:Lasersetorigin.jpg|thumb|Laser Set Origin]]
+# Check focus calibration [[File:Lasersetorigin.jpg|thumb| 5 Laser Set Origin]]
 # Set origin
 # In JobControl drag and drop your model from the Jobs list to the plate area.
@@ Ligne 13 : / Ligne 12 : @@
 # Start cutting
 # Go outside the box until the end of the cutting.
+[[File:Laserjobcontrol.jpg|1000px|Laser Focus Calibration]]