« Laser Cut Usage » : différence entre les versions

De wiki-fabmstic
Aller à la navigation Aller à la recherche
(Page créée avec « = Step by Step = # Check cut configuration ## No infill ## Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in # Print (Ctrl+P) # Put material in the m... »)
 
Ligne 5 : Ligne 5 :
# Print (Ctrl+P)
# Print (Ctrl+P)
# Put material in the machine
# Put material in the machine
[[File:Laserfocuscal.jpg|1000px|Laser Focus Calibration]]
[[File:Lasersetorigin.jpg|1000px|Laser Set Origin]]
# Check focus calibration
# Check focus calibration
# Set origin
# Set origin

Version du 28 avril 2017 à 13:02

Step by Step

  1. Check cut configuration
    1. No infill
    2. Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in
  2. Print (Ctrl+P)
  3. Put material in the machine

Laser Focus Calibration Laser Set Origin

  1. Check focus calibration
  2. Set origin
  3. In JobControl drag and drop your model from the Jobs list to the plate area.
  4. Check material configuration (with correct thickness)
  5. Check cutting time
  6. Start cutting
  7. Go outside the box until the end of the cutting.
Récupérée de « https://wiki-fabmstic.imag.fr/index.php?title=Laser_Cut_Usage&oldid=29 »