« Laser Cut Usage » : différence entre les versions

De wiki-fabmstic
Aller à la navigation Aller à la recherche
Aucun résumé des modifications
Ligne 5 : Ligne 5 :
# Print (Ctrl+P)
# Print (Ctrl+P)
# Put material in the machine
# Put material in the machine
[[File:Laserfocuscal.jpg|1000px|Laser Focus Calibration]]
[[File:Laserfocuscal.jpg|300px|Laser Focus Calibration]]
⚫
[[File:Lasersetorigin.jpg|1000px|Laser Set Origin]]
# Check focus calibration
# Check focus calibration
⚫
[[File:Lasersetorigin.jpg|300px|Laser Set Origin]]
# Set origin
# Set origin
# In JobControl drag and drop your model from the Jobs list to the plate area.
# In JobControl drag and drop your model from the Jobs list to the plate area.

Version du 28 avril 2017 à 13:03

Step by Step

  1. Check cut configuration
    1. No infill
    2. Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in
  2. Print (Ctrl+P)
  3. Put material in the machine

Laser Focus Calibration

  1. Check focus calibration

Laser Set Origin

  1. Set origin
  2. In JobControl drag and drop your model from the Jobs list to the plate area.
  3. Check material configuration (with correct thickness)
  4. Check cutting time
  5. Start cutting
  6. Go outside the box until the end of the cutting.
Récupérée de « https://wiki-fabmstic.imag.fr/index.php?title=Laser_Cut_Usage&oldid=30 »