Version du 28 avril 2017 à 13:10

Step by Step

Check cut configuration
1. No infill
2. Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in
Print (Ctrl+P)
Put material in the machine

Laser Focus Calibration
Check focus calibration

Laser Set Origin
Set origin
In JobControl drag and drop your model from the Jobs list to the plate area.
Check material configuration (with correct thickness)
Check cutting time
Start cutting
Go outside the box until the end of the cutting.

@@ Ligne 1 : / Ligne 1 : @@
 = Step by Step =
 # Check cut configuration
 ## No infill
 ## Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in
 # Print (Ctrl+P)
-# Put material in the machine
+# Put material in the machine [[File:Laserfocuscal.jpg|thumb|Laser Focus Calibration]]
-[[File:Laserfocuscal.jpg|300px|Laser Focus Calibration]]
+# Check focus calibration [[File:Lasersetorigin.jpg|thumb|Laser Set Origin]]
-# Check focus calibration
-[[File:Lasersetorigin.jpg|300px|Laser Set Origin]]
 # Set origin
 # In JobControl drag and drop your model from the Jobs list to the plate area.