Laser Cut Usage

Step by Step

1. Check cut configuration
   1. No infill
   2. Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in
2. Print (Ctrl+P)
3. Put material in the machine
   

   Laser Focus Calibration
4. Check focus calibration
   

   Laser Set Origin
5. Set origin
6. In JobControl drag and drop your model from the Jobs list to the plate area.
7. Check material configuration (with correct thickness)
8. Check cutting time
9. Start cutting
10. Go outside the box until the end of the cutting.