Laser Cut Usage

Step by Step

1. Open your SVG file with AI or Inkscape and check the cut configuration
   1. No infill
   2. Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in
2. Print (Ctrl+P), choose Trotec printer, your work will appear in the joblist in JobControl (JC)
3. Put material in the machine
   

   4 Laser Focus Calibration
4. Check focus calibration
   

   5 Laser Set Origin
5. Set origin
6. In JobControl drag and drop your model from the Jobs list to the plate area.
7. Check material configuration (with correct thickness)
8. Check cutting time
9. Start cutting
10. Go outside the box until the end of the cutting.