Différences entre les versions de « Laser Cut Usage »
Aller à la navigation
Aller à la recherche
| Ligne 1 : | Ligne 1 : | ||
= Step by Step = |
= Step by Step = |
||
| − | # Open your SVG file |
+ | # Open your SVG file with AI or Inkscape and check the cut configuration |
## No infill |
## No infill |
||
## Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in |
## Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in |
||
# Print (Ctrl+P), choose Trotec printer, your work will appear in the joblist in JobControl (JC) |
# Print (Ctrl+P), choose Trotec printer, your work will appear in the joblist in JobControl (JC) |
||
| − | # Put material in the machine [[File:Laserfocuscal.jpg|thumb|Laser Focus Calibration]] |
+ | # Put material in the machine [[File:Laserfocuscal.jpg|thumb| 4 Laser Focus Calibration]] |
| − | # Check focus calibration [[File:Lasersetorigin.jpg|thumb|Laser Set Origin]] |
+ | # Check focus calibration [[File:Lasersetorigin.jpg|thumb| 5 Laser Set Origin]] |
# Set origin |
# Set origin |
||
# In JobControl drag and drop your model from the Jobs list to the plate area. |
# In JobControl drag and drop your model from the Jobs list to the plate area. |
||
Dernière version du 3 mai 2017 à 11:52
Step by Step
- Open your SVG file with AI or Inkscape and check the cut configuration
- No infill
- Contour : Color (R:255 G:0 B:0), Thickness AI:0.0001in/Inkscape:0.01in
- Print (Ctrl+P), choose Trotec printer, your work will appear in the joblist in JobControl (JC)
- Put material in the machine
- Check focus calibration
- Set origin
- In JobControl drag and drop your model from the Jobs list to the plate area.
- Check material configuration (with correct thickness)
- Check cutting time
- Start cutting
- Go outside the box until the end of the cutting.
